Đặt hàng search

Lictor F7 Turbo – High quality Diesel engine oil

CONTACT US
RECOMMENDED RETAIL PRICE:
5L  560,000 VNĐ

Lictor F7 Turbo is the high-end of the Diesel oil is design for the new cars, passenger cars, operating at high speed, large load, for a long time and continuously.

Characteristic:

  • New friction denaturing technology ensures the surface of the part completely protects, increases the ability to slip, reduces friction, increases the operating efficiency of diesel engines by up to 15-20%, and saves fuel 15- 20%.
  • Maximum thermal and oxygen resistance is enhanced, maintaining oil performance under all conditions and reducing oil change intervals. Suitable for diesel engines that need long service life and extreme operating conditions.
  • Completely control the formation of deposits, coal dust on pistons, rings, and combustion chambers … helping to increase engine life.

Ingredient:

Mineral oils and additives.

Technical standards:

Oil meets the following requirements: SAE 15W-40, API CI-4.

User manual:

  • The oil is recommended for modern automotive engines using naturally aspirated or turbocharged brands from reputable brands requiring CI-4 quality levels: Toyota, Honda, BWM, Mercedes-Benz, Ford, Hyundai, Kia, Mazda, Nissan, Mitsubishi Motors, Das Auto …
  • To ensure efficiency, the oil should be changed after 12000-14000 Km of operation.

Methods of preservation:

Stored under the roof, in a dry, cool, temperature below 60oC.

Safe:

  • Avoid prolonged and frequent contact with the used oil.
  • To protect the environment, dispose of oil properly.

Packaging:

  • Bottle of 5 Liter.
  • Or package meets to customer’s requirements.

Technical Data:

Technical specifications Test methods Results
Density at 15oC (Kg/l) ASTM D 4052 0.86–0.89
Kinematic viscosity at 100oC (mm2/s) ASTM D 445 14-16
Viscosity Index (VI) ASTM D 2270 Min 110
Flash Point COC (oC) ASTM D 92 Min 230
Total base Number (mgKOH/g) ASTM D 2896 Min 12.5
Water content by vol/mass (%V) ASTM D 95 Max 0.05
Foaming at 93,5oC (ml/ml) ASTM D 892 Max 10/0
Pour point (oC) ASTM D 97 Max -18
error: Nội dung đã được bảo vệ !!